PRE-RELEASE
Brake and Accelerator Pedal Adjuster Actuator Motor Replacement
| Brake and Accelerator Pedal Adjuster Actuator Motor Replacement |
| Removal Procedure |
| Note | ||
|
Move the adjustable pedal assembly to the full forward, front of vehicle position prior to removing components. Failure to place the adjustable pedal assembly in the full forward position may result in incorrect accelerator and brake pedal step-over height and improper adjustable pedal function. |
| 1. |
Move the adjustable pedal assembly to the full forward, front of vehicle position.
|
|
| 2. |
Remove the accelerator pedal adjuster actuator (1). Refer to
Accelerator Pedal Adjuster Actuator Replacement
.
|
|
| 3. |
Insert a square drive tool into the brake pedal adjuster actuator cable drive, rotate the brake and accelerator pedal adjuster actuator motor drive screw to extend the accelerator pedal adjuster actuator to the full rearward position.
|
|
| 4. |
Remove adjustable pedal actuator motor retainer by compressing the locking tabs (1).
|
|
| 5. |
Disconnect the accelerator pedal adjuster actuator lever arm from the actuator motor jack.
|
|
| 6. |
Slide the adjustable pedal actuator motor (1) upward and disengage the actuator motor jack and screw guide from the adjuster actuator.
|
|
| 7. |
Remove the brake and accelerator pedal adjuster actuator motor.
|
|
| Installation Procedure |
| 1. |
Install the brake and accelerator pedal adjuster actuator motor to the accelerator pedal adjuster actuator.
|
|
| 2. |
Slide the adjustable pedal actuator motor (1) downward and engage the actuator motor jack and screw guide in the adjuster actuator.
|
|
| 3. |
Connect the accelerator pedal adjuster actuator lever arm to the actuator motor jack.
|
|
| 4. |
Install actuator motor retainer by inserting the locking tabs (1) into the accelerator pedal adjuster actuator.
|
|
| 5. |
Insert a square drive tool into the brake pedal adjuster actuator cable drive, rotate the brake and accelerator pedal adjuster actuator motor drive screw to retract the accelerator pedal adjuster actuator to the full forward position.
|
|
| 6. |
Install the accelerator pedal adjuster actuator (1). Refer to
Accelerator Pedal Adjuster Actuator Replacement
.
|
|
