Checking and Adding Power Steering Fluid
|
|
Checking and Adding Power Steering Fluid
|
|
1.
|
Run the engine until the power steering fluid reaches about 80°C (170°F).
|
|
4.
|
Clean the power steering fluid reservoir and the reservoir cap.
|
|
5.
|
Remove the reservoir cap.
|
|
6.
|
|
Note
|
|
Inspect the power steering pump fluid level at regular intervals.
|
Inspect the power steering fluid level on the cap stick. Ensure that the fluid level is at the MAX mark on the cap stick.
|
|
7.
|
Warning
|
|
When adding fluid or making a complete fluid change, always use the proper power steering fluid. Failure to use the proper fluid will cause hose and seal damage and fluid leaks.
|
|
|
|
|
|
|
Note
|
|
If the power steering fluid color is red or pink, use GM DEXRON®-VI Automatic Transmission Fluid. If the power steering fluid color is amber or brown, use GM Power Steering Fluid.
|
Add the proper fluid to the reservoir, if necessary. Refer to
Adhesives, Fluids, Lubricants, and Sealers
.
|
|
8.
|
Install the reservoir cap.
|
