SAAB WIS ONLINE

PRE-RELEASE

Power Steering Gear Inlet Pipe/Hose Replacement (LF1 LHD)

Power Steering Gear Inlet Pipe/Hose Replacement (LF1 LHD)



Callout Component Name

Preliminary Procedures

1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .

2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

3. Place drain pans under the vehicle.

4. Remove as much power steering fluid from the power steering fluid reservoir as possible.


1 Power Steering Gear Inlet Hose Fastener (Qty: 2) Refer to Fastener Caution .

Tighten

9 N m (80 lb in)
2 Power Steering Gear inlet Hose

Procedure

1. Install NEW power steering gear inlet hose seals.

2. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

3. Clean any excess power steering fluid from the vehicle.


Tighten

34 Nm (25 lb ft)


PRE-RELEASE