Steering Linkage Inner Tie Rod Replacement
|
|
Steering Linkage Inner Tie Rod Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedures
Remove the steering gear boot. Refer to
Steering Gear Boot Replacement
.
|
|
1
|
Steering Linkage Inner Tie Rod
Refer to
Fastener Caution
.
Procedure
|
1.
|
Place a wrench on the flats of the steering linkage inner tie rod housing.
|
|
2.
|
Rotate the steering linkage inner tie rod housing counterclockwise in order to remove the steering linkage inner tie rod from the rack.
|
|
3.
|
Rotate the steering linkage inner tie rod housing clockwise in order to install the steering linkage inner tie rod to the rack.
|
Tighten
70 Nm (52 lb ft)
|
