SAAB WIS ONLINE

PRE-RELEASE

Rear Axle Lower Control Arm Replacement

Rear Axle Lower Control Arm Replacement



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the rear spring. Refer to Rear Spring, Insulator, and Jounce Bumper Replacement .


1 Rear Suspension Lower Control Arm Ball Joint Nut Refer to Fastener Caution .

Procedure

Using the CH 43631 remover, remove the lower control arm from the knuckle .

Tighten

40 Nm plus an additional 125 degrees (30 lb ft) plus an additional 125 degrees

Special Tools

CH-43631 Ball joint remover
2 Rear Suspension Lower Control Arm Nut (Qty: 2)
3 Rear Suspension Lower Control Arm Bolt (Qty: 2)

Tighten

100 Nm plus an additional 90 degrees (74 lb ft) plus an additional 90 degrees
4 Rear Suspension Lower Control Arm


PRE-RELEASE