SAAB WIS ONLINE

PRE-RELEASE

Rear Axle Upper Control Arm Replacement

Rear Axle Upper Control Arm Replacement



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation

3. Support the rear lower control arm, if needed.


1 Rear Suspension Upper Control Arm Nut
2 Rear Suspension Upper Control Arm Adjuster Cam
3 Rear Suspension Upper Control Arm Adjuster Bolt Refer to Fastener Caution .

Tighten

70 Nm (52 lb ft) plus an additional 60 degrees
4 Rear Suspension Upper Control Arm Bolt

Tighten

150 Nm (111 lb ft) plus an additional 90 degrees
5 Rear Suspension Upper Control Arm Nut
6 Rear Suspension Upper Control Arm

Procedure

Check and adjust the rear camber. Refer to Rear camber adjustment .


PRE-RELEASE