SAAB WIS ONLINE

PRE-RELEASE

Shock Absorber Replacement

Shock Absorber Replacement



Callout Component Name

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .


1 Shock Absorber Bolt Refer to Fastener Caution .

Procedure

1. Disconnect the electrical for the electronic suspension, if equipped.

2. Support the lower control arm with the proper jackstand.


Tighten

100 Nm (74 lb ft)
2 Shock Absorber Nut (Qty: 2)

Tighten

17 Nm (13 lb ft)
3 Shock Absorber


PRE-RELEASE