PRE-RELEASE
Rear Toe Adjustment
| Rear Toe Adjustment |
| 1. |
Loosen the rear suspension adjustment link nuts (1) and (3).
|
|
| 2. |
Rotate the rear suspension adjustment link (2) until the proper specification is achieved. Refer to
Wheel Alignment Specifications
|
|
| 3. |
Refer to
Component Fastener Tightening Caution
.
Hold the rear suspension adjustment link (2) using an extra wrench. Tighten Outer nut, adjustment link, rear wheel suspension (1) to 150 Nm (110 lb ft) Inner nut, adjustment link, rear wheel suspension (3) to 135 Nm (100 lb ft) |
|
| 4. |
Recheck the toe setting after tightening, readjust if necessary.
|
|
