Roof Panel Molding Replacement (With V64)
|
|
Roof Panel Molding Replacement (With V64)
|
|
Callout
|
Component Name
|
Preliminary Procedures
Remove one side of the luggage carrier side rail. Refer to
Luggage Carrier Side Rail Replacement
.
|
|
1
|
Roof Panel Molding
Procedure
|
1.
|
Lift the forward and rear edge of the roof panel molding from the retention clip in the roof ditch.
|
|
2.
|
Release the molding from the full length of the roof ditch.
|
|
3.
|
Clean the roof ditch with a 50/50 mixture by volume of clean drinkable water and isopropyl alcohol.
|
|
4.
|
Ensure the roof ditch is clean and dry.
|
|
5.
|
Position the forward edge of the roof panel molding into the retainer clip and the front edge at the upper windshield.
|
|
6.
|
Using a roller-type tool, secure the roof panel molding into the roof ditch. Work from the front to the rear and ensure that the rear retaining clip is securely fastened.
|
|
