Front Side Door Window Regulator Replacement
|
|
Front Side Door Window Regulator Replacement
|
|
Callout
|
Component Name
|
Preliminary Procedures
Remove the front side door trim panel. Refer to
Front Side Door Trim Replacement
|
|
1
|
Front Side Door Window Regulator Guide Nuts to Window (Qty: 2)
Refer to
Fastener, Caution
Procedure
Remove the front side door water deflector.
Tighten
11 Nm (98 lb in)
|
|
2
|
Front Side Door Window Regulator Bolts (Qty: 5)
Procedure
|
1.
|
Position window to access the front side door window regulator guide bolts.
Loosen the nuts on the window regulator guide.
|
|
2.
|
Raise the window to the fully up position, tape in place.
|
Tighten
10 Nm (89 lb in)
|
|
3
|
Front Side Door Window Regulator
Procedure
|
1.
|
Disconnect the electrical connector from the motor.
|
|
2.
|
When installing a new window regulator, remove the two window regulator guides bolts.
|
|
3.
|
The window regulator guides must be raised to meet the window before installing the window regulator guides bolts.
|
|
