Rear Side Door Window Upper Reveal Molding Replacement
|
|
Rear Side Door Window Upper Reveal Molding Replacement
|
|
Callout
|
Component Name
|
Refer to
Glass and Sheet Metal Handling Warning
Preliminary Procedures
|
|
1
|
Rear Side Door Window Upper Reveal Molding Rivets (Qty: 4)
Procedure
|
1.
|
Lower the run channel weatherstrip, by grasping both upper inner corners and pull downward to expose the rivets. Do Not remove it from the door.
|
|
2.
|
When drilling cover/protect the interior trim and door from the metal shavings.
|
|
3.
|
The rivets are located in the inner upper door frame.
|
|
4.
|
Use a suitable tool, drill out the rivets from around the upper door frame.
|
|
|
2
|
Rear Side Door Window Upper Reveal Molding Retainers (Qty: 2)
|
|
3
|
Rear Side Door Window Upper Reveal Molding
Procedure
Using a suitable tool, install the rivets in the upper door frame.
|
Note
|
|
After drilling out the rivets check the door and the upper door frame for loose rivets ends. This will prevent rattles.
|
|
