Headlining Trim Panel Replacement (With C3U)
|
|
Headlining Trim Panel Replacement (With C3U)
|
|
Callout
|
Component Name
|
Warning
|
|
Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.
|
|
|
|
|
|
|
Warning
|
|
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.
|
|
|
|
|
|
|
Warning
|
|
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.
|
|
|
|
|
|
Preliminary Procedures
|
|
1
|
Headliner Trim Panel Assembly
Procedure
|
1.
|
Release two retainers in the rear part of headliner.
|
|
2.
|
Prior to removal, note the routing of the wire harness to aid in reassembly and to ensure proper installation.
|
|
3.
|
Disconnect the electrical connectors.
|
|
4.
|
If replacing the headliner assembly, transfer all necessary components.
|
|
5.
|
Ensure weatherstrips are properly positioned once headliner is in place.
|
|
6.
|
Disconnect the rear washer hose.
|
|
Note
|
|
When installing a new headliner, tape any unused connector to the headliner with a high adhesive tape.
|
|
