SAAB WIS ONLINE

PRE-RELEASE

Driver or Passenger Seat Back Cushion Pad Wire Replacement

Driver or Passenger Seat Back Cushion Pad Wire Replacement



Callout Component Name

Preliminary Procedures

1. Remove the video display, if equipped. Refer to Video Display Replacement .

2. Remove the driver or passenger seat back cushion finish cover. Refer to Driver or Passenger Seat Back Cushion Finish Panel Replacement (with UWG) Driver or Passenger Seat Back Cushion Finish Panel Replacement (without UWG) .


1 Front Seat Back Cushion Pad Wire Rivet (Qty: 4)
Warning

Use the proper eye protection when drilling to prevent metal chips from causing physical injury.



Procedure

1. Unhook seat back cushion cover J-hook from pad wire.

2. Drill out all of the guide rivets before removing the pad wire.


2 Front Seat Back Cushion Pad Wire

Procedure

When re-installing the cushion pad wire, re-rivet at the same location on the cushion frame with new rivets.


PRE-RELEASE