Driver or Passenger Seat Head Restraint, Replacement (with AHS)
|
|
Driver or Passenger Seat Head Restraint, Replacement (with AHS)
|
|
Pos
|
Component Name
|
Preliminary Procedures
Dismantle
Driver or Passenger Seat Back Cushion Cover and Pad
|
|
1
|
Driver or Passenger Seat Head Restraint Bezel (Qty: 2)
Procedure
|
1.
|
Raise the headrest to gain access to the head restraint bezel.
|
|
2.
|
Raise the headrest to gain access to the head restraint bezel.
|
|
|
2
|
Driver or Passenger Seat Head Restraint Clip (Qty: 2)
Procedure
Using a suitable pointed or flat-bladed tool, push the metal clip forward while pulling upward on the head restraint.
|
|
3
|
Bowden cable, actuator right side
Procedure
Loosen the neck restraint cable from the actuator holders on the right side.
|
|
4
|
Bowden cable, actuator left side
Procedure
Loosen the neck restraint cable from the actuator holders on the left side.
|
|
5
|
Driver or Passenger Seat Head Restraint
Procedure
|
1.
|
Loosen the head restraint cable strap, if fitted
|
|
2.
|
Note the head restraint cable routing for installation.
|
|
