SAAB WIS ONLINE

PRE-RELEASE

Driver or Passenger Seat Replacement

Driver or Passenger Seat Replacement



Callout Component Name
Refer to SIR Warning .

Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling .

2. Disconnect the seat belt from the tensioner. Refer to Front Seat Belt Anchor Plate Tensioner Replacement .

3. Remove the front seat adjuster track finish covers. Refer to Front Seat Adjuster Track Finish Cover Replacement (Front) Front Seat Adjuster Track Finish Cover Replacement (Rear) .


1 Front Seat Bolt (Qty: 2) Refer to Fastener Caution .

Procedure

Adjust the seat to the forawrd position to gain access to the rear bolts.

Tighten

45 Nm (33 lb ft)
2 Front Seat Assembly

Procedure

1. Disconnect the front seat and pretensioner electrical connector, and passenger presence system connector, if equipped.

2. With the aid of an assistant remove the front seat, by tilting the seat forward, and then lifting and pulling the seat rearwards to disengage the 4 front foot hooks.

3. Perform the front seat track synchronization procedure before seat installation. Refer to Front Seat Track Synchronization




PRE-RELEASE