|
Condition
|
Action
|
|
Note
|
|
Replace all seat adjusters as an assembly. Replace both sides at the same time.
|
|
|
The adjusters are not in parallel alignment with each other.
|
|
1.
|
Loosen the floor pan attaching bolts.
|
|
2.
|
Position the seat fully forward.
|
|
|
The adjusters are new, not broken in.
|
Operate the seat to the fully forward and fully rearward positions several times in order to work the tightness out of the channels.
|
|
The adjusters are improperly lubricated.
|
Lubricate the adjuster channels.
|
|
The adjusters are bent or damaged.
|
Replace the adjusters.
|
|
The adjusters are binding.
|
Lubricate or replace the adjusters.
|
|
The seat components are loose, damaged, or broken.
|
Repair or replace the defective components.
|
|
The seat mounting bolts are loose.
|
Tighten the mounting bolts to specifications.
|
|
The adjuster lock bar spring is disconnected or broken.
|
Repair or replace the spring.
|
|
The adjuster lock bar is sticking or binding.
|
Lubricate the lock bar pivot or replace the adjuster.
|
|
The adjuster lock bar is sticking or binding.
|
Lubricate the lock bar pivot.
|
|
The locking wire is too loose.
|
Tighten the locking wire.
|
|
The locking wire is disconnected or broken.
|
Repair or replace the locking wire.
|
|
The locking wire is too tight.
|
Loosen the locking wire.
|
