PRE-RELEASE
No communication with the SRS (Airbag).
Read the instructions below then start the fault diagnostic procedure.
Symptom: No communication with the SRS (Airbag).
| No communication with the SRS (Airbag). |
Fault symptoms
No communication with the SRS (Airbag).Condition
The following conditions are applicable:| • |
Ignition switch in ON position
|
|
Diagnostic help
First check the fuses for the Airbag control module and that no slide-out of the data link connector pins for communication with the Airbag has occurred.Then check whether the Airbag control module is awake and allows diagnostics communication. If this is the case, check whether the diagnostics tool works on another car.
If no fault can be found, repair or replace the communication lead between the Airbag control module and the data link connector.
