PRE-RELEASE
Rear belt, 4D
| Rear belt, 4D |
| To remove |
| 1. |
Raise the rear seat's seat cushion.
|
|
| 2. |
Remove the lower belt anchorage point (A)
|
|
| 3. |
Lower the backrest.
|
|
| 4. |
Remove the rear seat head restraint (A)
|
|
| 5. |
Remove the speaker grille (B) (fastened with clips) in the parcel shelf.
|
|
| 6. |
Remove the C-pillar trim (C) (fastened with clips).
|
|
| 7. |
Detach the seatbelt guide from the C-pillar trim (A).
|
|
| 8. |
Draw the belt through the C-pillar trim.
|
|
| 9. |
Remove the upper belt anchorage point from the C-pillar (B).
|
|
| 10. |
Lift the inertia reel away from the body.
|
|
| To fit |
| 1. |
Fit the belt onto the C-pillar's studs.
|
|||||||
| 2. |
Fit the upper belt anchorage point (B)
Tightening torque: 45 Nm (33 lbf ft)
|
|
| 3. |
Thread the belt through the C-pillar and fit the seatbelt guide (A).
|
|
| 4. |
Fit the C-pillar trim (C) (fastened with clips). The C-pillar trim has 2 guide pins.
|
|
| 5. |
Fit the speaker grille (B) (fastened with clips) in the parcel shelf.
|
|
| 6. |
Screw in the head restraint for the rear seat (A).
|
|
| 7. |
Check that the door weatherstrip fits correctly.
|
|
| 8. |
Raise the backrest.
|
|||||||
| 9. |
Fit the lower belt anchorage point (A).
Tightening torque: 45 Nm (33 lbf ft)
|
|
| 10. |
Fold back the seat cushion.
|
||||||||||
