PRE-RELEASE
Fan motor, seat
| Fan motor, seat |
| 1. |
Raise the front seat and remove it from the car, see
.
|
|
| 2. |
Remove the PSM control module from the bracket, 2 screws.
|
|
| 3. |
Remove the bracket for the PSM control module by cutting the cable tie.
Unplug the 29-pin connector from the bracket. |
|
| 4. |
Unplug the connector and cut the cable ties.
|
|
| 5. |
Remove the 2 nuts holding the fan motor.
|
|
| 6. |
Unplug the connector to the fan motor and cut the cable ties.
Lift out the motor. |
|
| To fit |
| 1. |
Refit the fan motor, 2 nuts.
|
|
| 2. |
Plug in the connector for the fan motor and fasten the wires with cable ties.
|
|
| 3. |
Replace the 29-pin connector on the bracket and reattach the bracket with cable ties.
|
|
| 4. |
Plug in the connector and secure the wires with cable ties.
|
|
| 5. |
Screw the PSM control module to the bracket, 2 screws.
|
|
| 6. |
Replace the front seat, see
.
|
|
