PRE-RELEASE
Vent device
| Vent device |
| To remove |
| 1. |
Raise the car.
|
|
| 2. |
Cut the cable tie.
|
|
| 3. |
Unplug and detach the connector to the vent device.
|
|
| 4. |
Detach the vent device from the filler pipe with a screwdriver.
|
|
| 5. |
Remove the vent device quick-release coupling from the tank as follows.
|
|
| 5.a. |
Press in the connector towards the tank in the direction of the connection.
|
| 5.b. |
Pinch the ring so that the catches go up.
|
| 5.c. |
Detach the connection by pulling it away from the tank.
|
| To fit |
| 1. |
Fit the vent device.
|
|||||||
| 2. |
Fit the vent device to the filler pipe.
|
|
| 3. |
Spray with Kontakt 61 and plug in the connector to the vent device.
|
|
| 4. |
Secure the cables with a cable tie.
|
|
| 5. |
Lower the car to the floor.
|
|
