PRE-RELEASE
Headlamp beam-length adjustment motor
| Headlamp beam-length adjustment motor |
| 1. |
Remove the direction indicator, see
. Remove the headlamp, see
.
|
|
| 2. |
Turn the motor approx. 45° and pull it straight out with medium force.
|
|
| To fit |
| 1. |
Remove the cover.
|
|
| 2. |
Lift up the reflector and press the motor shaft down into the groove.
|
|
| 3. |
Press in the motor and turn it approx. 45° to fasten it.
|
|
| 4. |
Fit the headlamp, see
.
|
|
| 5. |
Fit the direction indicator, see
.
|
|
