PRE-RELEASE
B1240
Read the instructions below then start the fault diagnostic procedure.
Symptom: Courtesy lights not working.
| B1240 |
Door lighting
Fault symptoms
Courtesy lights not working.Condition
The output is overload protected and is cut if the load is too high. A DTC is generated if this occurs.DTCs are not generated if the voltage is below 11 V or during diagnostic communication.
Diagnostic help
Make sure the bulbs are of the correct rating.If a lamp with too high a rating is fitted, diagnostic trouble code B1240 can be generated.
The overload protection is reset by turning the ignition OFF and then ON.
| Important | ||
|
The DICE control module can be damaged if a bulb with incorrect rating is fitted. |
||
