PRE-RELEASE
B2280
Read the instructions below then start the fault diagnostic procedure.
Symptom: Main beam malfunction
| B2280 |
Dipswitch relay
Fault symptoms
Main beam malfunctionCondition
The control module output is monitored and a DTC generated if there is a:| • |
Open/short circuit to ground.
|
|
| • |
Shorting to battery positive B+.
|
|
DTCs are not generated if the voltage is below 11 V or during diagnostic communication.
Diagnostic help
The output from DICE can be activated with the diagnostic tool.DTCs are not generated if the voltage is below 11 V or during diagnostic communication with DICE.
