PRE-RELEASE

Airbag, passenger

Airbag, passenger

Warning

Read through carefully before starting work.

To remove

Ignition switch in the OFF position.

Remove the dashboard, see group 8, Interior equipment, ”Adjustment, replacement”.

Unscrew the passenger airbag from the dashboard, 6 nuts.

Lift out the airbag.

To fit

Screw the airbag to the dashboard, 6 nuts.

Fit the dashboard, see group 8, Interior equipment, ”Adjustment, replacement”.

Note
In SE and FI markets, transfer or replace the warning label on the dashboard.

Turn on the ignition and check the SRS system and control module with the diagnostic tool as follows:

Connect the diagnostic tool to the diagnostic socket under the dashboard. Delete any trouble codes.

Switch off the ignition and switch it on again. Wait at least 10 minutes with the ignition switched on.

Check whether a diagnostic trouble code (DTC) is displayed:

If a diagnostic trouble code is displayed:

Carry out fault diagnosis in accordance with the directions given for each DTC.

If no diagnostic trouble code is displayed:

Fitting completed correctly. Disconnect the diagnostic tool.