PRE-RELEASE
Trim, tailgate, 5D
| Trim, tailgate, 5D |
| 1. |
Open the tailgate.
|
|
| 2. |
Remove the 3 window covers (fastened with clips).
|
|
| 3. |
Remove the clips at sides and bottom.
|
|
| 4. |
Prise out the opening handle frame using a screwdriver inserted in the three recesses. When the frame's clips have released, pull the frame downwards and bend it out.
|
|
| 5. |
Undo the closing handle retaining screws. The handle will remain in place in the trim.
|
|||||||
| 6. |
Remove the lamps and allow them to hang from their wiring.
|
|
| 7. |
Pull the top of the trim so that the clips come away.
|
|
| 8. |
Remove the pin from its hole by moving the trim slightly downwards. Lower the trim, making sure that the lamps pass out through their respective openings.
|
|
| To fit |
| 1. |
Insert the locating pin in its hole and move the trim upwards, making sure that the lamps pass through their respective openings.
|
|
| 2. |
Press the upper part of the trim into place.
|
|
| 3. |
Press the lamps into the trim.
|
|
| 4. |
Fit the screws securing the closing handle.
|
|
| 5. |
Fit the opening handle frame by hooking the lower clips into place and then pressing the frame home so that the remaining clips engage.
|
|
| 6. |
Fit the clips at sides and bottom.
|
|
| 7. |
Fit the window covers.
|
|
| 8. |
Close the tailgate.
|
|
