PRE-RELEASE
Replacement of rear upper protective shell 5D
| Replacement of rear upper protective shell 5D |
| To remove |
| 1. |
Open the tailgate
|
|
| 2. |
N/A Aero M04-
: Remove the protective corner mouldings.
|
|
| 3. |
Undo the screws securing the upper protective shell.
|
|
| 4. |
Detach the lower edge of the protective shell by loosening the clips.
|
|
| 5. |
Bend in the corner of the protective shell slightly and loosen it by pulling straight back.
|
|
| 6. |
For cars equipped with Saab Parking Assistance (SPA):
Detach the contacts from the sensors.
|
|
| To fit |
| 1. |
For cars equipped with Saab Parking Assistance (SPA):
Attach the contacts to the sensors.
|
|
| 2. |
Fit the protective shell by guiding the flaps in towards the bolts in the front edge.
For cars equipped with Saab Parking Assistance (SPA): Make sure that the sensors fit correctly in the bumper cavity. 
|
|
| 3. |
Guide the shell into the side track. Make sure that the corner of the protective shell does not damage the paintwork.
|
|
| 4. |
Press the corner of the protective shell into place.
|
|
| 5. |
Insert the flaps so that they fit at the bolts.
|
|
| 6. |
Press the clips into the bottom edge of the protective shell. Check the fit.
|
|
| 7. |
Press down the protective shell while tightening the bolts.
|
|
| 8. |
N/A Aero M04-
: Fit the protective corner mouldings.
|
|
| 9. |
Close the tailgate and check the fit.
|
|
