PRE-RELEASE
Engine oil and oil filter
| Engine oil and oil filter |
| Engine oil |
Change the oil. Fill to the MAX mark. The distance between the MAX and MIN marks is equivalent to 1 litre (1.05 qts).
Check the level while the engine is warm, 2-5 minutes after it has been turned off.
Oil capacity
B205E, B235E: 4.0 litres (4.3 qts) including filterB308E: 4.5 litres (4.8 qts) including filter
Oil type
See Recommended oil grades.Tightening torque, drain plug:
B205E, B235E, B308E: 25 Nm (19 lbf ft)
Check the oil level after changing the engine oil and oil filter.
| Oil filter |
| 1. |
Slacken the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.
|
|
| 2. |
Oil in the new oil filter's rubber gasket and fit it in place. Tighten the filter by hand.
|
|
| 3. |
Start the engine and check the filter for leaks.
|
|
