PRE-RELEASE
Oil filter
| Oil filter |
| To remove |
| 1. |
Remove the oil filler cap.
|
|
| 2. |
Raise the car and remove the lower engine cover.
|
|
| 3. |
Place a receptacle under the car and drain the oil filter through the plug on the bottom of the oil filter container.
|
|
| 4. |
Undo the cover on the oil reservoir with
83 95 808 Strap wrench for oil filter
.
|
|
| 5. |
Take out the oil filter and remove the O-ring from the oil filter container cover.
|
|
| To fit |
| 1. |
Fit a new O-ring on the oil container cover and set a new oil filter in the cover.
|
|
| 2. |
Fit the cover on the oil reservoir with
83 95 808 Strap wrench for oil filter
and refit the plug with a new gasket.
Tightening torque, plug 39 Nm (29 lbf ft) |
|
| 3. |
Fit the lower engine cover.
|
|
| 4. |
Lower the car, fill with engine oil and fit the oil filler cap.
|
|
