PRE-RELEASE
P0562
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
| P0562 |
Fault symptoms
| • |
CHECK ENGINE.
|
|
On-Board Diagnostics
Type of diagnosis:| - |
Continuous.
|
|
Enable criteria:
| - |
Ignition on (no start of engine).
|
|
Fault criteria:
| - |
When system voltage is less than 4V for more than 2.1 s.
|
|
Dependents:
| - |
None.
|
|
System reaction to a fault:
| - |
None.
|
|
OK report:
| - |
When system voltage is more than 4V for more than 2.1 s.
|
|
Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)
| - |
Type III.
|
|
Diagnostic help
This diagnosis is a check of the control module's internal measuring circuit. If a DTC is generated, it indicates that the measuring circuit is not working.Check battery status following Battery check .
