P1610
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The engine will not start.
Immobilizer Code not programmed
Fault symptoms
|
•
|
The engine will not start.
|
On-Board Diagnostics
Type of diagnosis:
|
-
|
Once per driving cycle.
|
Enable criteria:
|
-
|
Control module in delivery mode.
|
Fault criteria:
|
-
|
Immobilizer code not programmed.
|
Dependents:
System reaction to a fault:
|
-
|
The engine will not start.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.
