PRE-RELEASE
Glow plug control module
| Glow plug control module |
The glow plug control module is used to activate the glow plugs after a command from the engine management system. It is supplied with +30 from fuse 2 (60A).
There is a diagnostic function in the glow plug control module, which monitors the glow plugs, that informs the engine control module through a cable from glow plug control module pin 9A-B to engine control module connections 49 ad 68 if a fault should occur.
When the engine control module grounds pin 8, the glow plug control module will be activated, which means that pins 1, 2 and 6 on the control module are supplied with current.
| Diagnostics |
If the glow plug control module or corresponding wiring harness is out of order, it can be indicated by the following DTCs being generated:
| • |
P0380
Glow Control Unit. Feedback Circuit A, malfunction
|
|
| • |
P0382
Glow Control Unit. Feedback Circuit B, malfunction
|
|
| • |
P1381
Glow Control Unit. Short to B+
|
|
| • |
P1382
Glow Control Unit. Open Circuit / Short to Ground
|
|
System reaction to a fault
| • |
CHECK ENGINE on.
|
|
| • |
Starting difficulties on cold engine.
|
|
| • |
Running problems on cold engine.
|
|
