PRE-RELEASE
Power stage, injectors
| Power stage, injectors |
The power stage is located next to the control module inside the car behind the glove box and is the final stage for the injectors. The power stage governs the opening and closing of the injectors. The control module sends a low-level signal (5V) to the power stage, which in turn charges a capacitor for each injector in order to ensure sufficient current to open the injectors. The power stage receives information form the control module when injection is to take place.
| Diagnostics |
If the power stage or corresponding wiring harness is out of order, it can be indicated by the following DTCs being generated:
| • |
P0200
Electrical fault 1, EDU (powerstage fuel injectors).
|
|
| • |
P0216
EDU (powerstage fuel injectors), Malfunction.
|
|
| • |
P0261
Injector Circuit Cylinder 1. Short to Ground/Open.
|
|
| • |
P0262
Injector Circuit Cylinder 1. Short to B+/Open.
|
|
| • |
P0264
Injector Circuit Cylinder 2. Short to Ground/Open.
|
|
| • |
P0265
Injector Circuit Cylinder 2. Short to B+/Open.
|
|
| • |
P0267
Injector Circuit Cylinder 3. Short to Ground/Open.
|
|
| • |
P0268
Injector Circuit Cylinder 3. Short to B+/Open.
|
|
| • |
P0270
Injector Circuit Cylinder 4. Short to Ground/Open.
|
|
| • |
P0271
Injector Circuit Cylinder 4. Short to B+/Open.
|
|
| • |
P0273
Injector Circuit Cylinder 5. Short to Ground/Open.
|
|
| • |
P0274
Injector Circuit Cylinder 5. Short to B+/Open.
|
|
| • |
P0276
Injector Circuit Cylinder 6. Short to Ground/Open.
|
|
| • |
P0277
Injector Circuit Cylinder 6. Short to B+/Open.
|
|
| • |
P1200
Electrical fault 2, EDU (powerstage fuel injectors).
|
|
System reaction to a fault
| • |
P0200 and P1200:
Engine stops.
|
|
| • |
P0261, P0264, P0267, P0270, P0273 and P0276:
The idling speed will be set to 1000 rpm.
|
|
| • |
Short-circuit B+:
The engine stops.
|
|
| • |
Short to ground:
Fuel rail pressure max 60 MPa, fuel quantity max 20 mm
3
/combustion, pedal position sensor adjustable to max 40%.
|
|
