PRE-RELEASE

B2366

Read the instructions below then start the fault diagnostic procedure.

Symptom: Parking heater does not work.

B2366

Fault symptom

Parking heater does not work.

Conditions

Current consumption greater than 1A.

Diagnostic help

Parking heater can be activated with Tech 2.

Parking heater can be programmed.

Checking the wiring harness

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Check switches, connectors and crimp connections for oxidation, withdrawn pins and pin clamping force.

PRE-RELEASE

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.