C2465
Read the instructions below then
start the fault diagnostic procedure.
Symptom: ABS warning lamp on. ABS not functioning.
Pump Motor. Incorrect
Fault symptoms
ABS warning lamp on. ABS not functioning.
Conditions
The pump motor is monitored continuously for circuit continuity and short-circuiting. The pump-motor test starts when the ignition is switched ON and the road speed is above 6 km/h.
Diagnostic help
The pump motor can be activated using the diagnostic tool.
|
-
|
If the ABS control module is not grounding (pin 16), DTC C2465 will be generated.
|
