PRE-RELEASE
Handbrake shoes
| Handbrake shoes |
| To remove |
| 1. |
Remove the brake disc. Swinging caliper, see Adjustment/replacement, "Brake disc, rear wheel, swinging caliper, (15)". Fixed caliper, see Adjustment/replacement, "Brake disc, rear wheel, fixed caliper, (17)".
|
|
| 2. |
Remove the return spring.
|
|
| 3. |
Unhook the cable from the actuating lever.
|
|
| 4. |
Remove the inner return springs, using tool 89 95 607, and the retaining pins using tool 89 96 647.
|
|
| 5. |
Remove the brake shoes and adjusting unit.
|
|
| 6. |
Inspect the actuating levers and adjusting unit for wear and fit replacements as necessary.
|
|
| To fit |
| 1. |
Position the brake shoes, actuating lever and adjusting unit on the backplate.
|
|
| 2. |
Fit the springs for the retaining pins, using tool 89 96 647, and the return springs using tool 89 95 607.
|
|
| 3. |
Fit the brake disc. Swinging caliper, see Adjustment/replacement, "Brake disc, rear wheel, swinging caliper, (15)". Fixed caliper, see Adjustment/replacement, "Brake disc, rear wheel, fixed caliper, (17)".
|
|
| 4. |
Hook the cable in place and fit the return spring.
|
|
| 5. |
Adjust the handbrake, see
.
|
|
| 6. |
Fit the rear wheels, see
Wheels
.
Tightening torques aluminium wheel 110 Nm (81 lbf ft) steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft) |
|
| 7. |
Lower the car to the floor and depress the brake pedal to force out the brake pistons.
|
|
| 8. |
Adjust the brake fluid level.
|
|
| 9. |
Drive the car on test and check the operation of the brakes.
|
|
