PRE-RELEASE
Wheel sensor, front left
| Wheel sensor, front left |
| To remove |
| 1. |
Remove the battery cover.
|
|
| 2. |
Remove the battery.
|
|
| 3. |
Remove the maxi fuse holder.
|
|
| 4. |
Remove the battery tray.
|
|
| 5. |
Remove the clip and twist out the coolant reservoir.
|
|
| 6. |
Unplug the connector.
|
|
| 7. |
Remove the clip from the bracket.
|
|
| 8. |
Remove the clip from the connector.
|
|
| 9. |
Raise the car and remove the wheel.
|
|
| 10. |
Clean the area round the wheel sensor using a soft wire brush.
|
|
| 11. |
Undo the wheel sensor retaining bolt and remove the wheel sensor.
|
|
| 12. |
Remove the grommet and withdraw the lead.
|
|
| 13. |
Detach the lead from the clips and lift out the sensor.
|
|
| To fit |
| 1. |
Fit the wheel sensor into the holder.
|
|
| 2. |
Insert the lead through the rubber grommet.
|
|
| 3. |
Fit the rubber grommet.
|
|
| 4. |
Press the lead into the clips.
|
|
| 5. |
Fit the wheel and lower the car. The wheel must be suspended freely when tightening the wheel bolts. See
Wheels
.
Tightening torques aluminium wheel 110 Nm (81 lbf ft) steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft) |
|
| 6. |
Fit the clip to the connector.
|
|
| 7. |
Fit the clip in the bracket.
|
|
| 8. |
Plug in the connector.
|
|
| 9. |
Fit the coolant reservoir.
|
|
| 10. |
Fit the battery tray.
|
|
| 11. |
Fit the maxi fuse holder.
|
|
| 12. |
Fit the battery.
|
|
| 13. |
Fit the battery cover.
|
|
