PRE-RELEASE
Compressor's low pressure pipe (4-cyl diesel)
| Compressor's low pressure pipe (4-cyl diesel) |
| Important | ||
|
To avoid contaminating the system, clean the area around the parts to be removed. Contaminants and dirt can seriously affect the function and service life of the system. |
||
| To remove |
| 1. |
Place the car on a lift.
|
|
| 2. |
Drain the refrigerant from the A/C system. See
Draining and filling of refrigerant
.
|
|
| 3. |
Remove the RH headlamp and RH direction indicator with their connectors. See
Headlamps
.
|
|
| 4. |
Raise the car.
|
|
| 5. |
Fit the lower engine cover.
|
|
| 6. |
Disconnect the PAD connections from the high and low pressure pipes of the A/C compressor. Plug the pipes and compressor.
|
|||||||
| 7. |
Remove the intake manifold to the air cleaner.
|
|
| 8. |
Guide out the A/C compressor's low pressure pipe.
|
|
| 9. |
Lower the car to the floor.
|
|
| 10. |
Disconnect the PAD connection for the A/C compressor's low pressure pipe on the RH structural member. Plug the openings. Guide out the low pressure pipe.
|
|
| To fit |
| 1. |
Adjust the oil level. See
Filling and adjustment of compressor oil
.
|
|
| 2. |
Replace and lubricate the O-rings. Fit the A/C compressor's low pressure pipe to the PAD connection on the RH structural member.
Tightening torque: 10 Nm (7 lbf ft) 
|
|
| 3. |
Raise the car.
|
|
| 4. |
Replace and lubricate the O-rings. Fit the A/C compressor's low pressure pipe.
Tightening torque: 20 Nm (15 lbf ft) |
|
| 5. |
Replace and lubricate the O-rings. Fit the A/C compressor's high pressure pipe.
Tightening torque: 20 Nm (15 lbf ft) |
|
| 6. |
Fit the intake manifold to the air cleaner.
|
|
| 7. |
Fit the lower engine cover.
|
|
| 8. |
Lower the car to the floor.
|
|
| 9. |
Evacuate the A/C system and fill with refrigerant. See
Draining and filling of refrigerant
.
|
|
| 10. |
Fit the RH headlamp and RH direction indicator with their connectors. See
Headlamps
.
|
|
