PRE-RELEASE
Engine oil pressure sensor
| Engine oil pressure sensor |
| 1. |
Raise the car and remove the lower engine cover.
|
|
| 2. |
Unplug the oil pressure sensor connector.
|
|
| 3. |
Place a receptacle under the engine and remove the oil pressure sensor.
|
|
| To fit |
| 1. |
Fit the engine oil pressure sensor with a new seal.
Tightening torque: 30 Nm (22 lbf ft). |
|
| 2. |
Plug in the sensor connector and wipe away any spilled oil.
|
|
| 3. |
Fit the lower engine cover and lower the car.
|
|
| 4. |
Check the oil level. Top up as necessary.
|
|
