PRE-RELEASE
Pressure release valve
| Pressure release valve |
| 1. |
Raise the car and remove the front right wheel. Remove the cover on the drive belts.
|
|
| 2. |
Remove the plug from the timing cover.
|
|
| 3. |
Take out the seal, spring and valve.
|
|
| To fit |
| 1. |
Clean all the parts and change them if necessary.
|
|
| 2. |
Position the valve, spring and a new seal.
|
|
| 3. |
Screw in the plug.
Tightening torque: 45 Nm (33 lbf ft) |
|
| 4. |
Fit the cover on the drive belts and the wheel. See
Wheels
Tightening torque: 110 Nm (81 lbf ft) |
|
| 5. |
Lower the car. Check the oil level and top up if necessary.
|
|
