PRE-RELEASE
Hose with check valve for crankcase ventilation
| Hose with check valve for crankcase ventilation |
To remove
| 1. |
Raise the car and undo the hose coupling using small slip-joint pliers. Disconnect the hose from the oil trap.
|
|
| 2. |
Lower the car and remove the upper engine cover.
|
|
| 3. |
Disconnect the check valve from the clip and rubber hose and pull up the hose.
|
|
To remove
| Note | ||
|
Fitting can be performed from above. |
| 1. |
Route the hose and press home the hose coupling onto the oil trap.
|
|
| 2. |
Connect the check valve to the hose and clip.
|
|
| 3. |
Fit the upper engine cover.
|
|
