SAAB WIS ONLINE

PRE-RELEASE

Xenon headlamp, changing

Xenon headlamp, changing

Warning

HIGH TENSION

The headlamp/AHL control module and xenon headlamp ignition transformer generate a voltage in excess of 23 000 V. This voltage can be lethal to individuals with a weak heart or pacemaker. Treat this system with great respect and turn off the ignition before working on the system's components.


Warning

Read through Safety and handling instructions, headlamps with xenon bulbs before starting.


To remove


1. Turn the ignition key to LOCK.

2. Remove the headlamp, see Headlamp .

3. Undo the clip securing the xenon lamp.


4. Lift the xenon lamp straight out from the headlamp.

5. Unplug the xenon lamp.

Important

ESD-SENSITIVE COMPONENT

Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read Before changing a control module before changing a control module.


6. Unscrew the control module.


7. Lift up the control module and unplug the connector.



To fit

Important

ESD-SENSITIVE COMPONENT

Earth yourself by touching the car body before plugging in / unplugging components. Do not touch the component pins. Read Before changing a control module before changing a control module.



1. Plug in the control module.


2. Fit the control module into the headlamp.


3. Plug the connector to the xenon lamp.


4. Position the bulb by carefully inserting it straight into the headlamp housing.

5. Snap on the clip securing the xenon lamp.

6. Fit the headlamp, see Headlamp .


PRE-RELEASE