PRE-RELEASE
Solenoids
| Solenoids |
| To remove |
| Important | ||
|
Solenoids SLT, SLS and SLU that control the system pressure and Lock-up must not be dismantled! |
||
| 1. |
Remove the
valve housing cover
.
|
|
| 2. |
Unplug the relevant solenoid's connector.
|
|
| 3. |
Remove the solenoid's retaining bolt.
|
|
| 4. |
Prise the solenoid loose, using a screwdriver.
|
|
| Fitting |
| 1. |
Position the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 lbf ft). 
|
|
| 2. |
Plug in the solenoid's connector.
|
|
| 3. |
Fit the
valve housing cover
.
|
|
