PRE-RELEASE
Intermediate shaft bearing
| Intermediate shaft bearing |
| 1. |
Place the intermediate shaft in a vice.
|
|
| 2. |
Remove the small circlip.
|
|
| 3. |
Press out the shaft from its bearing using
87 91 287 Puller, 150 mm
and
87 92 210 Support, differential bearing
.
|
|
| 4. |
Remove the large circlip.
|
|
| 5. |
Press out the bearing with
87 91 311 Sleeve, bearing, driver shaft
and
87 92 236 Support F35, fitting speed gear
.
|
|
| To fit |
| 1. |
Press in the new bearing with 87 90 461 Sleeve, bearing race and
87 91 311 Sleeve, bearing, driver shaft
for support.
|
|
| 2. |
Fit the large circlip.
|
|
| 3. |
Press on the intermediate shaft with
87 90 487 Sleeve, differential bearing
|
|
| 4. |
Fit the small circlip.
|
|
