Checking and adjustment, selector lever cable
|
|
Checking and adjustment, selector lever cable
|
|
1.
|
Check that the play in the selector lever is the same in position N as in position D. If it is not, adjust the cable as follows.
|
|
2.
|
Move the selector lever to position P (inside the car).
|
|
3.
|
Lift up the cable adjustment catch.
|
|
4.
|
Move the gear selector on the transmission to position P.
|
|
5.
|
Roll the vehicle until the P lock engages.
|
|
6.
|
Press the selector lever rearwards and press down the adjustment catch so that it locks the cable ferrule.
|
Note
|
|
There is a play in the P-position (inside the car). The selector lever should be held rearward when the catch is pressed down.
|
|
|
7.
|
Check that the play is the same in positions N and D.
|
