SAAB WIS ONLINE

PRE-RELEASE

Brake fluid reservoir, RHD

Brake fluid reservoir, RHD

To remove


1. Cover the wings.

2. Empty the brake fluid reservoir, using the brake system bleeder unit (part No. 88 19 096).

3. Refit the cap to the reservoir.

4. Unplug the level sensor connector.


5. Manual gearbox: Remove the hose for the clutch.

6. Place some paper or a cloth under the master cylinder.

7. Withdraw the reservoir straight upwards.


To fit


1. Manual gearbox, if changing the brake fluid reservoir: Cut off the top of the reservoir's hose connection.

2. Grease the spigots with 90 166 282 Brake cylinder paste and press home the reservoir on the master cylinder.


3. Manual gearbox: Fit the hose for the clutch.

4. Remove the paper.

5. Plug in the level sensor's connector and return the main fuse box to its original position.

6. Fill up with brake fluid.

7. Check the system for leakage.


PRE-RELEASE