PRE-RELEASE
Impact sensor, front
| Impact sensor, front |
| To remove |
| 1. |
Remove the small grille on the side where the impact sensor is to be removed.
Pull on the slat that is next to the bottom one while pressing a screwdriver against the catch. |
|
| 2. |
Remove the connector.
|
|
| 3. |
Remove the impact sensor.
|
|
| To fit |
| 1. |
Fit the impact sensor.
Tightening torque 10 Nm (7.3 lbf ft) 
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Refit the grille.
|
|
