PRE-RELEASE
Oil level sensor
| Oil level sensor |
| To remove |
| 1. |
Remove
Sheet metal oil sump
|
|
| 2. |
Loosen the oil level sensor's connector and remove the lock fork. Pay attention to the location of the lock fork.
|
|
| 3. |
Remove the oil level sensor.
|
|
| To fit |
| 1. |
Fit the oil level sensor with new O-ring. Coat with vaseline or the like to facilitate fitting.
Tightening torque: 25 Nm (18 lbf ft) 
|
|
| 2. |
Fit the lock fork and attach the connector.
|
|
| 3. |
Fit
Sheet metal oil sump
.
|
|
