Thermostat, cylinder housing, 4-cyl
|
|
Thermostat, cylinder housing, 4-cyl
|
|
1.
|
Remove the engine cover.
|
|
2.
|
Raise the car and remove the lower cover.
|
|
3.
|
Place a receptacle under the radiator and drain the coolant. Loosen the expansion tank cap to facilitate draining.
|
|
4.
|
Remove the coolant hoses from the thermostat housing.
|
|
5.
|
Detach the thermostat housing cover with thermostat.
|
|
1.
|
Fit the thermostat housing cover with thermostat. Use a new gasket.
Tightening torque 8 Nm (6 lbf ft).
|
|
2.
|
Attach the hoses to the thermostat housing and fit the hose clips.
|
|
3.
|
Fit the engine cover and the lower cover.
|
|
4.
|
Add coolant to around 20 mm above the mark on the expansion tank. Check the system for leaks.
|
