PRE-RELEASE
Amplifier, Premium/Prestige
| Amplifier, Premium/Prestige |
| To remove |
| 1. |
Remove the
Side sill scuff plate
on the passenger side.
|
|
| 2. |
Remove the cover for the heating and ventilation unit (A).
|
|
| 3. |
Remove the lower section of the dashboard (B) under the glove box, 4 screws. There are clips in the front edge.
|
|
| 4. |
Unplug the connector for the floor lighting from the lower section of the dashboard.
|
|
| 5. |
Remove the clip (A) and fold away the mat.
|
|
| 6. |
Undo the two lower nuts (A) that secure the amplifier and only loosen the upper (B).
|
|
| 7. |
Lift the amplifier out and unplug the connector (C).
|
|
| To fit |
| 1. |
Plug in the connector (C).
|
|
| 2. |
Align the amplifier and fit the nuts (A). Tighten the nuts (A, B).
|
|
| 3. |
Fold back the mat and fit the clip (A).
|
|
| 4. |
Fit the
Side sill scuff plate
on the passenger side.
|
|
| 5. |
Plug in the connector for the floor lighting.
|
|
| 6. |
Fit the lower section of the dashboard (B). There are clips in the front edge.
|
|
| 7. |
Fit the cover (A).
|
|
| Note | ||
|
Physically, the Prestige amplifiers for 4D and 5D cars are the same in appearance and connectors, so that it is possible to connect an amplifier intended for a 5D car into a 4D car. The sound quality from the sub-woofer will not be satisfactory, however, as it will be driven too hard. In the other case, if an amplifier for a 4D car is fitted into a 5D, the sub-woofer reproduction will sound washy. |
