PRE-RELEASE
Main unit
| Main unit |
| 1. |
Connect Tech 2.
|
|
| 2. |
Establish communication with the audio system.
|
|
| 3. |
Select “
Programming ” from the system menu.
|
|
| 4. |
Press “
ENTER”.
|
|
| 5. |
Select DIVORCED with the change button and press “
OK ”.
|
|
| • |
“
DIVORCED ” must be selected when removing the main unit (to be installed in another car or to be returned for warranty repair).
|
| 6. |
The radio should go silent after a slight delay and “RADIO CODE” is displayed on SID.
|
|
| 7. |
Press both special tools into the holes provided for them in the main unit. Press the tools in until they lock, at which point a click will be heard.
|
|
| 8. |
Extract the main unit using the tool handles. Remove the special tools.
|
|
| To fit |
| Note | ||
|
Check that the attachment hooks on the short ends of the main unit are not damaged (bent in). |
| 1. |
Push the main unit into the space provided for it in the centre console until a click is heard.
|
|
| 2. |
While Tech 2 is connected and communicating with the audio system, select “
Programming ” from the system menu.
|
|
| 3. |
Press “
ENTER”.
|
|
| 4. |
Select MARRIED with the change button and press “
OK ”.
|
|
| • |
“
MARRIED ” must be selected when installing a main unit into a Saab 9-5.
|
| 5. |
“RADIO CODE” disappears from SID and the sound returns after a slight delay.
|
|
|
|||||||||||||
Warning
